Tipo ampliado protección rotatoria óptica sólida del codificador IP65 del eje 10m m

10mm rotary encoder for Incremental Type Rotary Encoder S70- Series encoder 

Items	Basic parameters
Brand	HENGXIANG
Encoder type	Incremental encoder
External diameter	70mm
Thickness	60mm
Installation dimension	diameter 60mm
Shaft length	20mm
Solid Shaft diameter	8mm(D shape)
Resolution	50;60;100;200;250;256;300;360;400;450;500;512;600;
	700;720;800;900;1000;1024;1200;2000;2048;2500;5000
	8192;10000；11520；16384；20000；23040
Output phase	A,B,Z,A-,B-,Z-
Supply voltage	DC5V & DC8~30V
Outlettype	radial cable
	radial socket
Output mode	NPN Collector open circuit output
	Voltage output
	Push-pull output
	Difference output	Long line drive( 26LS31)
		Compatible RS422
		Long line drive( RT7272)
Protection grade	IP50 ; IP65
Cable length	1M (cable length could be added appropriately by
	require, but it need payment individually)
Consumption current	100mA MAX
Top response frenquency	100KHZ
Allowable ripple	≤3%rms
Load Voltage	≤DC30V
Insulation strength	AC500V 60s
Insulation resistance	10MΩ
GND	not connect to encoder
Mark to Space ratio	45% to 55%
starting torque	less than 5x 10-3 N.m
Intertia moment	less than 3x 10-6kg.m2
Shaft load	Radial 30N; Axial 20N
Top REV	5000RPM ;IP65≤3000r rpm
Bearing life	1.5x109 revs at rated load(100000hrs at 2500RPM)
Environmental temperature	Operating:-20 ～+80°；storage:-25 ～+85°
Enviromental humidity	Operating and storage: 35-85%RH(noncondensing)
Vibration(endure)	Amplitude 0.75mm,5-55Hz,2 hours for three axis individually
Sock(endure)	490m/s2 ,11 ms three times for X,Y,Z direction individually
Shaft Material	Stainless steel
Shell Material	Dia cast aluminium
Cable length	1000mm(cable with shielding)
Certification	CE
package	Carton box
Net weight	About 450g (with package)

Principle of encoder
An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if freight collector
If you do not have any courier account, we will check and find a cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price could be as cheap as possible.
 

More information
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.